Soviet Colours

I’ve recently been putting together a small force of our new Neo-Soviet tanks (and some of the older ones as well). Up ’til now I’ve only been able to paint a sample of each model for the website and display stand, so I was looking forward to assembling a larger army and getting them on table.

Altogether I’ve started with a dozen vehicles (you might spot more than that in the photos – I painted two extra assault guns to use on the stand at the same time). My force consists of three Bars tanks, two Vombats, two Terminators, one each of the new assault guns and a recce section of one Rosomakha and two Laska tankettes.

I’ve based the camouflage scheme on the sample models I painted before Salute, using the excellent Anarchy Models airbrush stencils, but with a slight difference. Whereas my first models had a three colour scheme with two layers of stencils, the main force was painted with a two-colour grey-green utilising the Mini Digi Camo sheet (basically lots of tiny squares arranged in random patterns). This was simply to save time, as two layers of stencils on a dozen vehicles would have taken ages.

I won’t go through the full step-by-step process this time – you can read my previous article for that. However, as a quick summary, the process was:

  • Spray with grey automotive primer (Halfords)
  • Drybrush primer light grey
  • Apply stencils
  • Airbrush Vallejo Russian green over entire vehicle
  • Drybrush whole vehicle light green
  • Remove stencils (be thorough here – it’s easy to lose some of the stencils)
  • Touch up any areas where the stencils have pulled up the primer or green has leaked under the stencils with a small brush
  • Brush paint in remaining details – guns, crew, stowage, tracks, lights, sensor lenses
  • Brush coat entire vehicle in Army Painter Strong Tone Quickshade
  • Leave 24 hours (minimum) to dry
  • Apply decals – the glossy Quickshade is deal for this
  • Airbrush acrylic matt varnish (Tamiya Flat Clear) – DO NOT use Army Painter’s own aerosol varnish, it reacts with the Quickshade and will ruin your hard work

This is the first half of my army – the next stage will be the infantry and APCs (if you’ve read this month’s Miniature Wargames, you might have seen a preview…).

City of Dreams

It’s Friday, so it’s new release time again. We try and vary our new releases across the different ranges, and today the wheel has stopped on our Small Scale Scenery range, and what we hope should be some very useful City Apartment Blocks. Many European city centres are built, at least partially, on a block system. The best example I can find to illustrate this is Barcelona’s appropriately named Eixample district – the photo below shows the layout of the city perfectly.

Photo taken from Wikipedia - licensed under the Creative Commons Attribution-Share Alike 2.0 Generic license.

The blocks of apartments generally have shops or offices on the ground floor with 4-6 levels of apartments above that. They surround a central courtyard which can be a garden space, parking or can sometimes be partially filled with smaller buildings and sheds.

For this initial release we’ve created three sets – a pack of four corners, another of four straight blocks, and a third consisting of two T-pieces and two straight pieces with an archway into the courtyard area, all with flat-topped mansard roofs (although there are one or two areas with flat roofs for variety). All are 1-piece resin castings. Each piece is slightly different so that the look of the blocks is varied. The blocks are built on a 40mm footprint – each corner is 40x40mm with the depth of the apartments set at 20mm. This means that a pack of four corners will create a block 80x80mm, with a central 40x40mm courtyard. Adding straight pieces means that the blocks can be extended in 40mm increments. For gaming purposes, this works perfectly with rules that use 40mm frontages for figure bases (such as Land Ironclads).

If all goes well with these, there’s certainly plenty of scope to add more variety in terms of frontage detail, different roof types, varied number of floors etc.

SSS-8094 – City Block Corners – £7.50
SSS-8095 – City Block Straights – £5.00
SSS-8096 – City Block Ts and Arches – £6.50

Yenpalo Tank Upgrade (now I remember !)

We’ve had this new version of the Yenpalo Xarledi tank ready for some time, but just haven’t got round to releasing it – originally I just hadn’t had time to paint one, but then I finally managed to get that done. It was then supposed to have been rolled in with last week’s release of the Neo-Soviet tank hunters, but again was somehow missed off (the vehicle got onto the website, but news of it was missed from the blog post). I blame this damn summer cold I’m suffering from…

Anyway, it’s a support version of the Xarledi grav tank, armed with a short barrelled fusion cannon in place of the mass driver. It’s available now from the website (and in fact has been since last Friday !).

SF15-1101a – Xarledi Support Tank – £9.00

Tank Hunters

The Neo-Soviet Union armed forces are continuing the rollout of their new series of heavy armoured vehicles. The ISU-135 Mech and and ISU-175 Volk are the latest generation Tank Hunter and Assault Gun respectively. Based on the common Bars chassis, both feature the same fixed superstructure but carry different weapons – the Mech a 135mm long-barrelled DS gun, the Volk a massive 175mm low-velocity howitzer for clearing fortifications and strongpoints.

Both have a choice of secondary weapon – tri-barrel gatling, twin missile launcher or long-range sensor pod.

Also available is a 5-piece armour kit to upgrade vehicles from the Bars/Vombat/Terminator/Mech/Volk family. Includes sideskirts (fit any vehicle), bow armour plate (fits any tank) and two turret cheek armour pieces (Vombat or Bars).

SF15-1207 – Mech Tank Hunter – £8.50
SF15-1207a – Volk Assault Gun – £8.50
SF15-1254 – Heavy Tank Armour Kit – £3.00