Bits’n’Pieces

Following on from the 6mm Slammers bits on Tuesday, today we have a miscellany of 15mm items. The most important of these is probably the release (at last !) of the 15mm A21M Mortar Jeep, which fits in the ToE of several forces besides the Slammers themselves. It consists of the standard resin jeep model with an extra metal sprue of pieces including the mortar, two ammo cases and a small radome (which very handily hides the mounting hole for the tri-barrel).

Next to the jeep is an M9A3 Combat Car of Harris’ Commando – this is identical to the standard M9A1 used by the Slammers, except for the armament; instead of three tri-barrels, the M9A3 has two gatling railguns on the flanks and a light laser forward. The model includes crew figures and an etched brass splinter screen. This is something you could have made by buying the basic M9A1 plus some accessory packs from us, but we’ve made it easier by doing it for you.

Speaking of tri-barrels, we’ve remastered the standard 2cm weapons fitted to most Slammers vehicles. All models will now have these included instead of the old version and we’ve made a separate pack of nine available in our 15mm Accessories range. And on the subject of etched brass (and Accessories), there’s also a pack of stowage baskets to fit any vehicle in need of a bit more storage room. Lastly, the two cranes from the E8 Wrecker are available separately in case you’d like to create your own recovery vehicle.

HS15-113a – A21M Mortar Jeep – £3.00
HS15-112e – M9A3 Harris Combat Car – £5.00

SF15-930 – Etched Brass Turret Baskets (x3) – £2.50
SF15-931 – Tribarrel Powerguns (x9) – £1.50
SF15-932 – Cranes (x2) – £3.00

We Have Normality

Anything you still can’t cope with is therefore your own problem.

I love the English weather. In the space of 48 hours we’ve gone from sub-zero temperatures and mounds of snow to ten degrees and watery sunshine – and this being England, it has of course rained a bit as well (which fortunately has washed away the slush).

I’ve been beavering away at the workshop and have shifted a good chunk of the order backlog which built up while I was snowbound – another solid day’s work tomorrow and it’ll be cleared completely.

Phil was also snowed in for a few days so has been ploughing through moulds like there’s no tomorrow – so in celebration of our hard work, here’s some new stuff.

In 6mm we have more options for other Hammer’s Slammers:The Crucible mercenary units. The Lightning Division get the M9A16 Calliope version of the combat car, while the Waldheim Dragoons finally come to 6mm in the form of the M2A2 and M2A5 tank and command versions of the Icarus blower tank.

HS6-1712a – M9A16 Calliope Car – £1.00
HS6-1911 – M2A2 Blower Tank – £1.50
HS6-1911a – M2A5 Command Tank – £1.50

Update – It’s Still Snow Joke !

The weather is still pretty grim here – we’ve had more snow with another bout forecast for this afternoon. I haven’t ventured to the workshop at all since Monday, although main roads are clear the back routes are still tricky to negotiate. So, if you have an outstanding order with us (anything placed since last Sunday) then there will be a bit of a delay. The forecast is for a bit of a thaw from Sunday – the temperatures should at least climb above freezing – so I’ll get back to the workshop on Monday and should have the backlog cleared in a couple of days.

As I mentioned in my last post, I’m going to postpone this week’s new release until I’ve cleared the order queue. Phil has also been off work for part of this week as his office was closed, so he’s taken the chance to get ahead with mould production so we have more new stuff ready to release.

I haven’t been idle – apart from walking the dog in the snow (which she loved, as you can see) I’ve been painting some new bits – I’ve now finished all of our new releases for the next four weeks. And looking further ahead, Salute is now just six weeks away. As regular readers of our blog will know, we like to have lots of shiny new releases to tempt you with at the show (and to make our overseas customers envious). This year’s focus is firmly on 15mm Sci-Fi and in particular Hammer’s Slammers – if all goes well we could have as many as a dozen new vehicles in lots of variants. We’re working on some important vehicle types that feature in a number of the detachment lists with the aim of making it possible to create those detachments again. The design work for these is mostly done, and we already have the masters for many of them cleaned up and prepped for moulding (a couple have already been moulded in fact). And the hope is that we’ll get as many of these vehicles as possible available in 6mm as well.

It won’t be all Slammers though – there are half-a-dozen spaceship masters on my workbench, some Aeronef in the works and today I’m working on new 2mm scale buildings. Oh, and we’ve commissioned some new (and unusual) 28mm Great War figures – Dib Dib Dib!

Having waffled on about all the new stuff, it wouldn’t be fair to leave you without at least one or two pictures – so here we are…