Firstly, we’d like to give ourselves a small pat on the back – if you look to the right you’ll see a shiny medal which we’ve received from Feedspot, a content aggregator for websites, blogs and Youtube channels. We haven’t had many awards in our time (although we did get a couple from the currently hibernating SFSFW many years ago) so this is a nice addition to our virtual trophy cabinet.
Now onto business – this week’s new release. The desert is a harsh environment, with the combination of sun, sand and wind making life difficult for anyone trying to eke out an existence among the dunes. Some colonists have tried to protect themselves from the climate by digging themselves into the terrain and building their houses, workshops underground. In some cases they’ve built above ground and then buried the structures under a layer of plascrete and sand, leaving just the doors and windows exposed, with a few vents and exhausts.
Today we’ve added three underground structures to the website – a couple of small houses and a larger complex with garage doors and a large exhaust fan. There’s also a pack available containing one large structure and three each of the smaller ones. They’re listed under a new category of buildings, Underground Structures.
They are all one-piece resin castings which will make a rather different addition to your 6mm desert Sci-fi layout. We’ll have stock of these at the Joy of Six in a couple of weeks.
BP300-701 – Buried Structures Pack – £15.00 B300-701 – Large Buried Structure – £4.50 B300-702 – Small Buried House #1 – £2.00 B300-703 – Small Buried House #2 – £2.00
We have further additions to the Underground Structures range planned – in fact they’re more then planned, we already have some of them in hand, as you can see below. These are effectively sunken pits where the underground dwelling is based around a central courtyard. We should also have these at Jo6.
We have a number of 15mm detachment packs available for Hammer’s Slammers:The Crucible, although none for the Slammers Regiment themselves. We’ve made some steps towards rectifying that by releasing seven smaller Troop packs, which are half-sized units each consisting of four TUs (tactical units – a vehicle or infantry team). The Slammers are powerful enough that these troops can stand up for themselves against many other forces full-size detachments.
There are seven options available covering all the troops in the Hammer’s Slammers Troop Detachment List, covering mixed all-arms units, armoured and infantry troops and even a troop for the White Mice, the Slammer’s internal police section.
A number of our American Republic 6mm vehicles have been out of production for a while, in particular the support variants of the Baumann and Oldmann light tank. Today we’re releasing (or re-releasing ?) new versions of these models derived from the new 15mm designs of the same vehicles.
There are four new variants of the Baumann – the base armoured infantry carrier armed with autocannon and missiles, and anti-aircraft, anti-tank and command variants. The Oldmann comes in the gun version and also one with the same 16-round anti-tank missile turret as the Baumann. The picture below shows the difference between the old and new Baumann models.
The new versions of the Baumann will replace those in both of the AmRep army packs and the AmRep Infantry Company pack. We’ve also brought back the third AmRep army pack, the Cavalry Squadron, based around the Kochte tank.
Coming up in the next month is our next show, the Joy of Six in Sheffield on Sunday July 15th. Run by Baccus Miniatures, the event (as its name suggests) is a 6mm scale-specific event covering all eras and genres from ancients to Sci-Fi.
We’ll be there with a cut-down trade stand, carrying our full range of 6mm SF miniatures, army packs, rules, buildings and figures. We’ll bring along the full Squadron Commander range of starfighters (since they’re also 6mm), our selection of 3D printed scenic items and the full Small Scale Scenery range.
As always, we’re happy to take orders (for any of our ranges, not just the ones mentioned above) either paid for on the day or in advance. We can take orders up until the Wednesday before the show (the 11th) although obviously sooner is better.
We’re aiming to have a decent selection of new 6mm items for the day – all the new Slammers vehicles ought to be ready by then, assuming we don’t have any more irritating delays 😕.
As well as those we should have some redesigned models from the ‘normal’ 6mm range, a selection of new buildings, hopefully some new infantry figures and maybe even something big, stompy and two-legged. News and previews of all of these over the next few weeks.
One further minor piece of housekeeping – I’m off for a short break, back again on Monday. I’m aiming to get all outstanding orders cleared today but any new orders will be delayed until the start of next week.
New out of the factory this week are a trio of support half-tracks for our 15mm Polish forces. The Wilk (Wolf) chassis carries either a pair of tri-barrel AA gatlings, a quad anti-tank missile system or a 12-barreled multiple rocket artillery system.
The Wolf is derived from the Suwalska half-track family, but with a flat-bed rear replacing the former’s passenger compartment. The turrets are of Soviet origin, bought in and retro-fitted with indigenous electronics and sensors.
We seem to be on a roll with our Aeronef updates as we gradually redesign the range. In between the major fleets, we’ve also found time to update some of the other fleets, and this week the Italians get an upgrade with new versions of their two battleships. The Re d’Italia and Guilo Cesare are smaller vessels, not up to the size of some of huge battlewagons of the major powers, but perfectly adequate to face off against the Austro-Hungarians in their seemingly permanent squabble over the Adriatic Sea.
As with all of our updates, the models now get separate turrets of a new design, which are also available as accessory packs. The hulls are resin, with metal funnels, tails, turrets and masts.
I wanted to do something different with the Italian colour scheme, so I took a cue from my friend Silvio, who owns the largest Italian Aeronef fleet in existence. I went for conventional black hulls, but painted the superstructures and turrets in Azzurri blue (the paint I used is Citadel Caledor Sky). They were painted in my usual base/wash/highlight style and finished with tail markings from Dom’s Decals.
The Italian fleet pack has also been updated, and now contains a Re d’Italia, two Cesares and escorts
VANFP-1801 – Italian Fleet Pack – £22.00 VAN-1801 – Giulo Cesare class Light Battleship – £6.00 VAN-1802 – Re d’Italia class Battleship – £7.00 VAN-7181 – Italian Twin Turrets (x10) – £1.50 VAN-7182 – Italian Triple Turrets (x10) – £1.50
It’s back to 15mm again this week, with some new towed guns. They’re listed under EuroFed in the 15mm range, but will also serve for various hammer’s Slammers forces. There are four options in all, using the same chassis and shield but with different weapons types – DS gun, howitzer, gatling and powergun barrels. For crew, the existing Fasolini gun crew are ideal with one seated and two kneeling crewmen per gun.
As far as towing options go, there are lots of options in our ranges already – from the EuroFed Musareigne, Lievre and Belette wheeled vehicles, Polish Suwalska half-track or the the recently released Viking half-track. Most of the Centurion LTVs also have towing hooks and are used in the Crucible rules as towing vehicles, while units such as Harris Commando use the M9A10 Cargo Car as a prime mover. We’ve also released a pack of small towing hooks to allow you to convert any vehicle to an artillery tractor.