Baby Eaglets

Off the production line this week are these two 6mm Eaglewing VTOLs, the Demeter and the Perseus.

The Demeter is a two-seater attack craft while the Perseus is a utility VTOL with room to transport an infantry squad in the cabin.

The Eaglewing is a Hammer’s Slammers mercenary unit equipped primarily with VTOLs that operate almost as ground vehicles, flying nap-of-the-earth in combat zones to keep out of sight of enemy anti-aircraft weapons. Away from the front line they can fly higher and use their high speed to redeploy quickly as required. They also have a small number of conventional ground vehicles for mortar and artillery support.

Other users of the Demeter and Perseus include the 101st Texian Light Airborne, a fully airmobile infantry unit, and the Fianóglach veterans of Guardforce O’Higgins.

HS6-2601 – Perseus HU.1 Utility VTOL – £2.00
HS6-2602 – Demeter Attack VTOL – £2.00

Finally, just a quick notice that I’m away for a couple of days. We’re up to date with orders to the end of Sunday (15th) and I’ll be back on Friday to deal with any that arrive this week so there shouldn’t be much delay – I just may not be able to answer any emails as quickly as usual.

Signature Delivery

We’ve been meaning to do this for a while, and we’ve finally got around to adding an option on the website for tracked/signed-for deliveries. Our current shipping rates don’t normally allow for this, but for customers that would prefer the peace of mind of tracking and a signature, for an additional cost (£1.25 UK/£5.00 overseas plus VAT if applicable) you can select a Signed For service (either First Class Signed For in the UK or International Tracked & Signed overseas).

Right, now back to some proper work…

Anders Plus

We previewed a bunch of new 6mm models for the Joy of Six show – and I managed to get the cooling tower painted and photographed! The first of these have gone onto the website today, along with (thanks to a well timed delivery of etched brass bits) a new vehicle that hasn’t previously been seen.

The Rapier MBT is being phased in by Anders Legion to replace their inventory of obsolescent Cutlass tanks. It’s a tracked vehicle with a large, sloped turret equipped with a heavy railgun and light ATGW launcher.

The Xiphos is a rather unusual hybrid tank destroyer/combat car. It’s an open backed vehicle, with the rear of the crew compartment protected by a mesh splinter screen, similar to those deployed on Slammers Combat Cars. Primary armament is either a railgun (the same calibre as that on the Rapier but with a shorter barrel) or a pair of breech-loading gun-mortars. It also has three tri-barrel powergun mounts – one on the roof operated by the commander standing in the rear, and another pair mounted over the rear wings. Anders Legion are re-equipping with these in place of their current fleet of Uralvagonzavod Halberds. The 6mm model comes with separate tri-barrels and an etched brass piece for the screen – you’ll need tweezers to assemble this one!

Although we don’t yet have the rest of the Flaming Sword of the Holy Brotherhood ready (a bit of a FUBAR with one of the moulds…), we wanted to get the M12 out as it’s a great little model. The M12L14 tank destroyer is a fusion-powered blower, mounting a 20cm powergun and remote-control tri-barrel. It’s used by the Flaming Sword in their heavy detachments and as the primary armoured vehicle of Broglie’s Legion

Finally for this week, a handy little Radome building which makes an ideal game objective. The dome is the same as our larger radar bunker, so you can create a radar array similar to the Fylingdales Moor installation.

HS6-2011 – M12L14 Tank Destroyer – £1.50
HS6-3611 – Rapier Tank – £1.25
HS6-3612 – Xiphos Tank Destroyer – £1.25
HS6-3612a – Xiphos Mortar Support Vehicle – £1.25

B300-144 – Radome – £2.00

That’s all for now – see you Sunday!

Six Specials

We have a some new bits and pieces for the Joy of Six on Sunday – all 6mm scale (of course !). We have a mix of vehicles, VTOLs, starfighters and buildings to try to tempt the moths out of your wallets – none of these have been seen before in 6mm. Some of the models – especially the Squadron Commander starfighters and the Eaglewing VTOLs – will be in short supply as I don’t yet have production moulds so will only be able to bring what I can cast from the master moulds.

First up – a reminder about pre-orders. I finished stocking up for Jo6 yesterday so I will have some time tomorrow to cast up any last minute orders for collection at the show. For details about exactly what I’m bringing and how to order, click here.

So, onto the models. I was hoping to have the 6mm versions of the Flaming Sword of the Holy Brotherhood ready but we haven’t quite managed to get all of them done in time. However, I will have stocks of their largest vehicle, the M12L14 Tank Destroyer. This turretless beast is armed with a 20cm powergun and can go toe-to-toe with a Slammers M2 tank.

At Salute we released a 15mm VTOL, the Demeter. On Sunday we go one better with two new 6mm VTOLS, the Demeter (r) and its cousin, the Perseus. The former is an attack VTOL while the Perseus is a small troop carrier – the equivalent of a UH-1 Huey.

This one is brand new – it’s currently going under the codename of Rapier, although that may change 🙂 It’s a heavy tank used used by Anders Legion, who are rolling it out to replace their Cutlass tanks, and has a heavy cannon plus a missile pod. Expect to see this in 15mm very soon too.

As mentioned, we have two new starfighters in the Squadron Commander range. The first is the AmRep Raptor attack fighter. This has four X-foils with torpedo pods sandwiched between them either side and twin gatlings. The Germans get the Kondor two-seat heavy fighter, with it’s remote rear gun turret. I did make versions of both of these ages ago which never went into production, but these are brand new digital sculpts. Both will be available singly or in flights of four.

This handy little building is a radar dome – a conventional radar dish is enclosed in a protective dome to keep out the effects of weather, sandstorms, small animals etc.

Largest of all is this power station cooling tower. We’ve had a hollow 3D-printed item in our Shapeways shop and we’ve sold a few of these at shows, but this is a much larger resin version – at over 4″ tall, it’s almost twice as large as the 3D printed model.

But, much to my annoyance, I forgot to bring one home from the workshop to photograph, so for now you’re left with this enigmatic silhouette… (I’ll try to remember one tomorrow !).

HS6-2011 – M12L14 Tank Destroyer – £1.50
HS6-2601 – Perseus Utility VTOL – £2.00
HS6-2602 – Demeter Attack VTOL – £2.00
HS6-3611 – Rapier Tank – £1.25

SCR-203 – Raptor Assault Fighter – £3.00
SCP-203 – Raptor Flight – £11.00
SCR-303 – Kondor Heavy Fighter – £3.50
SCP-303 – Kondor Flight – £13.00

B300-144 – Radome – £2.00
B300-145 – Power Station Cooling Tower – £10.00

For those who can’t make the show, most of these models will be trickling onto the website in the near future. For those who can, please come and say hello on Sunday, but be gentle with me – I’ll be at a wedding the day before and although I won’t be hungover (I have to drive to Sheffield from Kent on Saturday evening) I may not have had much sleep…