{"id":8884,"date":"2018-07-06T09:09:10","date_gmt":"2018-07-06T08:09:10","guid":{"rendered":"http:\/\/www.brigademodels.co.uk\/Blog\/?p=8884"},"modified":"2018-07-06T09:27:51","modified_gmt":"2018-07-06T08:27:51","slug":"that-sinking-feeling","status":"publish","type":"post","link":"https:\/\/www.brigademodels.co.uk\/Blog\/2018\/07\/that-sinking-feeling\/","title":{"rendered":"That Sinking Feeling"},"content":{"rendered":"
<\/fb:like><\/div><\/div>

Following on from last week’s first steps underground with the release of the buried structures<\/a>, this week we have four more ways to live below the surface of a planet – clearly HG Well’s artilleryman<\/a> was onto something.<\/p>\n

For want of a better name, we’ve called these ones Sunken Structures<\/strong>. They’re based around a courtyard sunk into the ground around 25 feet or so, with doors and tunnels leading off from the open central area. Windows and vents pierce the side walls and exhaust towers protrude above the surface. Access from ground level can be by simple stairs cut into the rock or elevators running up the side of the pits. Some are accessed through small entrance buildings on the surface above. One of the structures is an octagonal pit with a large workshop door off to one side, intended as a below-ground landing bay.<\/p>\n

\"\"<\/p>\n

The models are one-piece resin castings. They’re all cast as simple square or rectangular pieces, and all are 25mm deep – the idea is for them to be modelled into a terrain baseboard or hill\/mesa using 25mm thick insulation foam (inexpensive white polystyrene can be had from Wickes in the UK for just \u00a37 for an 8’x4′ sheet). I’ll write an article on this in the near future, I promise.<\/p>\n

We’ll have stocks of these at the Joy of Six<\/a> next week. We’re getting close to the deadline for advance orders for the show, especially if you would like me to bring anything that’s not either 6mm or Small Scale Scenery.<\/p>\n