Category Archives: 3D Print

Full of Gas

Posted on February 17, 2013 by Tony

We’ve added a couple of new bits to our Shapeways store recently, both to complement our 2mm buildings and fit in nicely with the Aeronef and Land Ironclad ranges. First up is a gasholder (or gasometer). I’m not sure about … Continue reading →

Posted in 3D Print, Land Ironclads, New Releases, Small Scale Scenery | Comments Off on Full of Gas

Celtos Base-ics #2

Posted on January 21, 2013 by Tony

Having written a rambling piece about the new unit bases for Celtos, I mentioned that we were already in the process of making resin cast bases, but neglected to show any pictures. As you can see in the picture above, … Continue reading →

Posted in 3D Print, Celtos, Mouldmaking and Casting | Comments Off on Celtos Base-ics #2

Size Matters

Posted on January 12, 2013 by Tony

The German vehicles we previewed the other day are the first of our new wave of 15mm items that will replace existing older models. One of the aims is to scale-up the 15mm range – the older models were made … Continue reading →

Posted in 15mm SF, 3D Print, Previews | 1 Comment

German prints

Posted on January 9, 2013 by Tony

We previewed the new German 15mm vehicles during the 12 days of Christmas posts, but the pictures were of the CGI artwork rather than the actual models. So here are photos of the models themselves, awaiting a bit of cleanup … Continue reading →

Posted in 15mm SF, 3D Print, Previews | 2 Comments

Late Arrival

Posted on December 13, 2012 by Tony

UPS got their act together and remembered to put the parcel on the van this time, so the new batch of 2mm building prints have arrived. This package contained, amongst other things, the farms, factories and terraced houses that we … Continue reading →

Posted in 3D Print, Land Ironclads, Previews, Small Scale Scenery | 2 Comments

2mm Building Previews

Posted on November 30, 2012 by Tony

As mentioned earlier this week, we’re working on a new range of buildings for our Land Ironclads VSF range. The buildings are all modelled at 1/1000th scale so besides Land Ironclads they are also ideal for 2mm or 1/1200th vehicles … Continue reading →

Posted in 3D Print, Land Ironclads, Previews, Small Scale Scenery | 5 Comments

Brig​ade Shapeways Store ​- 10% off this week ​only

Posted on November 27, 2012 by Tony

For this week only, all of the items in our Shapeways store are 10% off. To get this deal you need to e-mail us with your requirements, NOT purchase them directly from the store. We’ll send you a PayPal invoice … Continue reading →

Posted in 3D Print, Shapeways, Special Offers | Comments Off on Brig​ade Shapeways Store ​- 10% off this week ​only

Tiny Houses (redux)

Posted on November 20, 2012 by Tony

A couple of weeks ago we brought you pictures of some 3D prints of our first set of Land Ironclads scale (roughly 2mm / 1/1000th) houses. Sadly these weren’t really up to scratch, being a bit off the mark in … Continue reading →

Posted in 3D Print, Land Ironclads, Previews, Shapeways, Small Scale Scenery | 12 Comments

An Old Favourite

Posted on November 16, 2012 by Tony

One of our most popular spaceships has always been the German Pommerania Dreadnought. It was one of our earliest models and has been through several iterations as a multipart kit, then a single piece hull cast firstly in metal and … Continue reading →

Posted in 3D Print, Previews, Spaceships | 4 Comments

PacFed Prints

Posted on November 13, 2012 by Tony

Finally managed some photos – the translucent prints aren’t the easiest thing to photograph, the lack of contrast makes it hard to pick things out but the photos below are reasonably clear I hope. There are a few print lines … Continue reading →

Posted in 15mm SF, 3D Print, Previews | 5 Comments